Need help?Do you have a question about the Shure QLXD4 and is the answer not in the manual?
General| Quantity | 1 |
|---|---|
| Impedance | 50 Ω |
| Antenna type | Removable |
| Display type | LCD |
| Mounting type | - |
| Product color | Black |
| Built-in display | Yes |
| Housing material | Metal |
| Adjacent channel rejection | 80 dB |
| Power supply type | DC |
Weight and Dimensions| Depth | 151 mm |
|---|---|
| Width | 197 mm |
| Height | 41 mm |
| Weight | 777 g |
Details the QLXD2 handheld transmitter and its available microphone cartridges.
Describes the QLXD1 bodypack transmitter for guitar systems.
Details the QLXD1 bodypack transmitter for headworn or lavalier microphones.
Information on the combo system including bodypack and handheld transmitters.
Instructions for connecting power and antennas to the receiver.
Guide to using the receiver's scan function to find an optimal frequency.
Instructions for inserting batteries into the transmitter.
Steps for synchronizing the transmitter and receiver using IR.
Procedure for testing audio levels and adjusting gain.
Identifies and explains the controls and connectors on the receiver's front panel.
Identifies and explains the connectors on the receiver's back panel.
Outlines the main menu options and navigation flow.
Describes lock options for gain, menu, and power controls.
Steps to navigate and save lock settings on the receiver.
Steps to clear lock options or unlock specific controls.
Steps to lock or unlock the transmitter controls.
Steps to unlock the transmitter controls.
Steps to create an audio channel with AES-256 encryption enabled.
Steps to remove encryption from an audio channel.
Explains how audio channels are formed and methods for tuning.
Simplest method to create an audio channel using scan and IR sync.
Procedure for the receiver to automatically find the best available channel.
Automatically tunes the transmitter to match the receiver frequency via IR sync.
Manually setting receiver and transmitter to the same group and channel.
Manually setting transmitter and receiver to a specific frequency.
How to select the transmitter RF power setting (Lo or Hi).
Selecting and placing specific channels/frequencies into custom groups.
Steps to create custom groups on the receiver.
How to connect the receiver to a network via Ethernet.
How the receiver obtains an IP address automatically via DHCP.
Common network issues and their solutions.
Manually configuring IP and subnet mask settings.
Overview of managing the system with Shure Wireless Workbench and ShurePlus Channels.
Ensuring consistent operation by matching firmware versions.
Using the Shure Update Utility for firmware management.
Procedure for updating the receiver firmware.
Downloading firmware to the receiver for transmitter updates.
Table listing common issues and their corresponding solutions.
Resolving issues related to locked receiver or transmitter controls.
Addressing errors caused by incompatible firmware versions.
Resolving errors from mismatched encryption keys.
Understanding RF signal indicators and range.
Methods to minimize RF interference for better performance.
Tips to extend the effective operating range of the system.
Solutions for when the RF OL icon appears on the RF meter.
Table detailing specific error codes and their solutions.
Specifies the RF carrier frequency range, varying by region.
Provides typical battery life for SB900A and alkaline batteries.
Table listing frequency bands and corresponding transmitter output power.
Continuation of the table listing frequency bands and output power.
To Next Page
