X53 902 to 907.500, 915 to 928
(Brazil)
1 / 10
X54 915 to 928 (Australia) 1 / 10
Z17 1492 to 1525 1 / 10
Z18 1785 to 1805 1 / 10
Z19 1785 to 1800 1 / 10
Z20 1790 to 1805 1 / 10
* Power delivered to the antenna port
Note: Frequency bands might not be available for sale or authorized for use in all countries or regions.
For the band Z17 (1492-1525 MHz), it must be used indoors only.
For the Band Z19 (1785-1800MHz) used in Australia, per Radio Communications Low Interference
Potential Devices Class License 2015; item 30 note C: the system must be operated within the range
of 1790-1800MHz when used outdoors.
Certifications
QLXD1, QLXD2, QLXD4
Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B)
Meets essential requirements of the following European Directives:
WEEE Directive 2002/96/EC, as amended by 2008/34/EC
RoHS Directive 2011/65/EU
Note: Please follow your regional recycling scheme for batteries and electronic waste
Hereby, Shure Incorporated declares that the radio equipment is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet
address: http://www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: EMEAsupport@shure.de
QLXD1, QLXD2
Certified under FCC Part 74.
Certified by IC in Canada under RSS-102 and RSS-210.
IC: 616A-QLXD1G50, 616A-QLXD1H50, 616A-QLXD1J50, 616A-QLXD1L50, 616A-QLXD2G50, 616A-
QLXD2H50, 616A-QLXD2J50, 616A-QLXD2L50.
To Next Page
Loading...
