Shure SCM410 - Power Led; Rear Panel

Shure Incorporated
5/25
Controls overall output level.
POWER LED
Lights green when mixer is plugged into a power source.
POWER Switch
Turns the mixer on and off.
Note: Country dependant
Rear Panel
Power Connector
Unit is energized when the power cord is plugged into a 100-120 Vac (SCM410) or 220-240 Vac (SCM410E) pow-
er source. NOTE: There is no power On/Off switch on this mixer.
DIP Switch
The 4-position DIP switch provides additional functions. Refer to the “DIP Switch Functions”section.
Microphone Logic Connector
High density DB-15 male connector provides connection to GATE OUT, MUTE IN, and OVERRIDE IN logic termi-
nals on each channel. Refer to the “Advanced Functions” section.
Note: This is not a VGA monitor port.
AUX OUT Phono Connector
Feeds consumer-level audio equipment, such as a tape recorder, VCR, or video camera. Not affected by MIC/
LINE switch.
MIC/LINE XLR OUTPUT Connector
Can be set for microphone or line-level output via a DIP switch.
LINK IN/OUT Connector
Permits multiple SCM410/E, FP410, SCM810, SCM800, or AMS8100 mixers to be linked, creating additional in-
puts.
MIC LEVEL XLR INPUT Connectors
Active balanced microphone-level XLR inputs. For instructions on how to modify the level of these inputs, refer to
the “Internal Modifications” Addendum.
7
8
1
2
3
4
5
6
7