Need help?Do you have a question about the Shure SCM268 and is the answer not in the manual?
General| Frequency range | 20 - 20000 Hz |
|---|---|
| Channels quantity | 4 channels |
| Digital sound processing | - bit |
| Microphone input impedance | 1.2 Ω |
| Output impedance | 870 Ω |
| Total Harmonic Distortion (THD) | 0.25 % |
| DJ mixer | - |
| Product color | Black |
| Video capability | No |
| AC input voltage | 220 - 240 V |
| Power consumption | 30 mA |
| AC input frequency | 50 / 60 Hz |
| AUX in | Yes |
| AUX out ports | 1 |
| Number of microphone inputs | 4 |
Lists four transformer-balanced microphone inputs, switchable output, LED meter, five -10 dB line-level inputs, and built-in phantom power.
Adjusts gain for microphone level inputs and auxiliary level inputs 1-4.
Adjusts the auxiliary channel input gain.
LED meter indicates peak output signal level.
Adjusts the overall output level.
LED indicates when the unit is plugged in and receiving power.
Switch for powering the unit on/off, country dependent.
Accepts 100-120 Vac (SCM268) or 220-240 Vac (SCM268E) power.
Transformer-balanced XLR output connector, switchable between mic and line level.
Sets the signal level of the XLR output connector between Mic and Line.
Phono jack feeds consumer-level audio equipment.
Phono jacks connect to consumer-level audio sources.
Adjusts gain for microphone and auxiliary inputs of channels 1-4.
Master output gain control adjusts XLR and auxiliary outputs.
Lists all hardware supplied with the SCM268 for installation.
Details how to mount the SCM268 in single or dual rackmount configurations.
Steps to access the printed circuit board for internal modifications.
Instructions to bypass the built-in low-cut filter for a given channel.
Lists optional accessories available for the SCM268.
Lists available replacement parts for the SCM268.
To Next Page
