Shure SM35 - Certifications; CE Declaration of Conformity; Specifications; Microphone Type

Shure Incorporated
4/6
Note: Do not store the microphone in damp, enclosed spaces. Allow perspiration to dry completely before storing.
Certifications
Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC per
formance.
The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: info@shure.de
Specifications
Type
Electret Condenser
Frequency Response
40Hz to 20,000Hz
Polar Pattern
Unidirectional (Cardioid)
Output Impedance
100Ω, @ 1 kHz
Sensitivity
-57.8dBV/Pa, @ 1 kHz, 1000Ωload
Signal-To-Noise Ratio
59.2dB, @ 1 kHz, 1000Ωload
Maximum SPL
151.3dB, 1000Ωload, @ 1 kHz, 1% THD
[1]
[1]