Shure SM35 - Dynamic Range; Self Noise Level; Power Requirements; Polarity

Shure Incorporated
5/6
Dynamic Range
116.5dB, @ 1 kHz, 1000Ωload
Self Noise
34.8dBSPL-A, 1000Ωload
Power Requirements
TA4F +5VDC (nominal), 10V maximum (DC bias)
XLR connector 12 to 52VDC, phantom power
Polarity
TA4F
Positivepressureondiaphragmproducesposi-
tive voltage on pin 3 with respect to pin 1
XLR
Positivepressureondiaphragmproducesposi-
tive voltage on pin 2 with respect to pin 3
Cable
1.1m (45in.)
Connector
TA4F or XLR
Weight
72g (2.53oz.)
Measurements taken using RPM400 preamp
*All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly
decreased headroom and sensitivity.
[1]
[1]
[1]