SiAECOSYS VOTOL EM150 - User Manual

SiAECOSYS V2
1
VOTOL EM Controller Program Manual

Summary

Software Installation and Driver Setup

Software Installation

Guide to installing the software for controller programming.

USB Driver Installation

Steps to install drivers for USB connectivity with the controller.

Controller Connection and Host Configuration

Connecting the Controller

Instructions for physically connecting the controller to the computer.

Host Computer Selection

Guidance on selecting the correct host computer software for the controller.

Controller Parameter Configuration

Setting Page 1: Basic Parameters

Configuration of fundamental parameters like voltage, current, and model.

Setting Page 2: Current and Voltage Details

Detailed settings for bus bar current, phase current, and voltage protection.

Motor Jitter Adjustment

Adjusting parameters to control motor vibration and stability.

Setting Page 3: Motor Parameters

Configuration of motor-specific parameters such as type, phase, and speed.

Sport Mode Settings

Parameters specific to configuring the controller for sports or performance modes.

Three-Speed Gear Settings

Configuration of the controller's three-speed gear selection and related functions.

Advanced Operations and System Management

Update ECU Program

Process for updating the controller's firmware or ECU program.

Display Page Settings

Understanding and configuring the display of controller status and parameters.

Port Function Configuration

Setting up and mapping controller ports to specific functions or gears.

Import and Save Configuration

Procedures for importing and exporting controller parameter configurations.

SiAECOSYS VOTOL EM150 Specifications