Need help?Do you have a question about the SiAECOSYS VOTOL EM50 and is the answer not in the manual?
Guides the installation of necessary USB drivers for software functionality.
Details the process of installing the EM_V3 series debugging program.
Details the wiring diagram and USB connection for controller setup.
Guides the selection of host computer software based on controller model.
Configuration options for the first page of the software interface.
Settings for battery voltage and compensation methods.
Bus bar and phase current settings based on controller specifications.
Parameters for sports mode, flux weakening, and downhill brake assist.
Motor settings, including pole pairs, phase shift, and motor type.
Explanation of the analog vehicle instrument display for speed, voltage, and current.
Details the interface for configuring controller ports and functions.
Configuration for three-speed gear selection and Hall sensor settings.
Procedures for importing and exporting controller parameter configurations.
General| Rated Voltage | 48V |
|---|---|
| Max. Current | 50A |
| Support Programmable by PC | Yes |
| Waterproof Grade | IP65 |
| Peak Current | 50A |
| Power Output | 3000W |
| Protection Features | Over-current, Over-voltage, Over-temperature |
| Communication Interface | CAN bus |
To Next Page