SiAECOSYS VOTOL EM - User Manual

SiAECOSYS V2
1
VOTOL EM Controller Program Manual
Non-profession do not operate!

Summary

1. Software Installation

1.1 USB Driver Installation

Installation of USB drivers for software connection.

2. Controller Connection

2.1 Connect Controller

Steps to connect the controller via USB debug port.

3. The Setting

1. SETTING PAGE 1

Configuration settings on the first software page.

1.2 Current Device Settings

Setting bus bar current based on ECU model.

2. SETTING PAGE 2

Configuration settings on the second software page.

2. Parameters Setting for Sports Mode

2.2 Bus Bar Current Setting

Setting bus bar current based on controller type.

2.2 Downhill Electric Brake Assist

Enabling downhill electric brake assist for slow slopes.

2.3 Flux Weakening Compensation

Flux weakening compensation for V-shaped magnetic steel.

3. The Setting Page 3

3.1 Motor Setting

Motor settings: pole pairs, phase shift angle, type.

3.2 Controller to Speedometer Data Output

Controller output types for speedometer: single-line and hall.

3.6 Reversing Speed Limit

Adjusting reversing speed limit using calculation formula.

3.7 Reversing, EBS, Safety Switch Functions

3.7.1 Vehicle Weight and Speed Settings

Settings for vehicle weight and two-wheeler speed intervals.

3.8 Low Brake Enable and Safety Switch

Configuring low brake and validating safety switch.

3.10 Import;Save Configuration Files

Importing and saving configuration files.

4. Expanded Page

4.1 Update ECU Program

Steps to update ECU program via serial port.

4.2 Import Configuration

Importing controller parameters using INI file.

4.3 Change Configuration

Steps for changing configuration, connecting, and writing parameters.

5. The Setting Page Display

Vehicle Instrument Display Elements

Displays for motor speed, voltage, current, fault, gear, functions, and temperatures.

6. Port Setting Interface

6.1 Default Port Configurations

Default port functions for various Lande transfer line and controller models.

1. One-line Setting

2. Hall Setting

3. Trigger Three-Speed Setting

4. Jog Three-Speed Setting

5. Configuration Import and Export

SiAECOSYS VOTOL EM Specifications