SiAECOSYS VOTOL EM100

Need help?

Do you have a question about the SiAECOSYS VOTOL EM100 and is the answer not in the manual?

Summary

Software Installation

USB Driver Installation

Guides on installing necessary USB drivers for software compatibility on supported Windows versions.

Controller Connection

Connect Controller

Simple wiring diagram and steps for connecting the controller via USB debug line.

USB Debug Line Selection

Selecting appropriate USB debug lines based on controller type (CAN/non-CAN) and specific models.

Pre-Connection Checks and Power-Up

Check USB Port Installation

Verifying USB port installation status using the computer's device manager.

Sports Mode Parameters

Flux Weakening and Brake Settings

Sport Mode Flux Weakening Value

Setting the flux weakening value for S gear based on motor parameters and vehicle speed.

Advanced Settings - Page 3

Motor Setting Configuration

Configuring essential motor parameters like pole pairs, phase shift angle, and motor type.

ECU Program Update and Configuration Management

Update ECU Program

Steps to connect and download the ECU program using a bin file.

Import Configuration Settings

Importing controller parameters from INI files and confirming successful import.

Voltage and Current Axis Interpretation

Q-axis and D-axis Voltage Ranges

Explains the normal ranges for Q-axis and D-axis voltages and their adjustments.

Q-axis and D-axis Current Interpretation

Port Setting Interface

Port Function Configuration Details

EM150 sp Specific Port Settings

Three-Speed Setting Options

Jog and Three-Speed Configuration

Sport Mode Speed Settings

Configuration Management and Precautions

Import and Save Configuration

Parameter Adjustment Precautions

Critical warnings and precautions for adjusting controller parameters to prevent damage.