Sices GC310 - Page 11

GC310, GC350, GC500, GC500Plus and GC500Mains User’s Manual 11
Signalling
Function
Rif. 2c

GC500
Mains
Flashing at 25% ON if open after a Close
command.
GC500
Mains
Flashing at 75% ON if closed after a Close
command.
GC500
Mains
Flashing at 50% during synchronization phase,
together with the BUS LIVE warning light.
3.3
The backlight lamp is managed by Gen-set, which switches it off after a programmable time (P.492) if
no buttons are pressed in the meantime. Press any button to light it again. This function can be disabled
by setting parameter P.492 to 0.
Contrast can be adjusted by pressing a combination of EXIT/SHIFT button + LEFT button
Ref. 1a to decrease it or the EXIT/SHIFT button + the RIGHT button Ref. 1a to increase it.
3.3.1
The display has different display modes with various pages.
Mode
Page identifier
Programming
P.XX
Status information
S.XX
Electrical measurements
M.XX
Engine measurements
E.XX
Parallel measures
GC500/GC500
Plus
/GC500
Mains
B.XX
GC500/GC500
Plus
/GC500
Mains
History logs
H.XX