Table 23: IO-Link Port object
Browser name Class Description
3, “Alarms” Object Reading of errors and
warnings
3, “Capabilities” Object Pin 2 support. Maximum
current consumption Port‐
Class.
3, “Configuration” Object Reading of port configura‐
tion. DeviceID, VendorID,
cycle time, pin 2 configura‐
tion, Port mode, validation
and backup.
3, “Device” Object Access point to the device
objects and variables.
3, “DeviceConfigura‐
tionDisabled”
Variable Not used
2, “Diagnostics” Object Diagnostic information on
current consumption, volt‐
age and temperature
3, “Information” Object Used cycle time, baud
rate, status and connection
quality.
2, “MethodSet” Object Method for setting the con‐
figuration
0, “NodeVersion” Variable Version of the OPC UA port
object
2, “ParameterSet” Object Variable collection
3, “SIOProcessData” Object Pin 2 and pin 4 assignment
3, “Statistics” Object Measured minimum and
maximum current, temper‐
ature, voltage. IO-Link
WakeupCount, FrameOk‐
Count and RetryCount.
OPERATION 8
8027836./2022-06-10 | SICK O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350
51
Subject to change without notice
To Next Page
Loading...
