SICK IDM1 Series - Page 10

9
Operation and output control
Command Parameter Selection Option Code
Operation Mode
Low power mode (Low power triggering)
Trigger mode/Serial mode (External triggering) ◆
Presentation mode (Auto detection)
Alternative mode (Periodic power off)
Flash mode (Pulse driven reading)
Force mode (Continued power on)
Toggle mode (Repeat reading)
Diagnostic mode (Test reading)
Level Mode
0
1
2
3
4
5
6
7
8
Inverse Reading
Disable ◆
Enable
0
1
Redundancy
None
Level 1 ◆
Level 2
Level 3
Level 4
Level 5
To prevent potential miss reading.
0
1
2
3
4
5
Power On Indicator Disable (LED off)
LED steady on ◆
LED flash
0
1
2
Vibrator Disable
Enable ◆
Optional function
0
1
Symbology ID Transmission Disable all symbology ID ◆
Enable prefix SICK symbology ID
Enable suffix SICK symbology ID
Enable both prefix and suffix SICK symbology ID
Enable prefix AIM symbology ID
Enable suffix AIM symbology ID
Enable both prefix and suffix AIM symbology ID
0
1
2
3
4
5
6
Dollar Sign Output
Dollar sign output as “ $ “ ◆
Dollar sign output as “￥“
Dollar sign output as “ € “
Dollar sign output as “ £ “
Dollar sign output as “¢ “
0
1
2
3
4
Good Read Delay None ◆
200 msec.
500 msec.
1 sec.
1.5 sec.
2 sec.
3 sec.
0
1
2
3
4
5
6
Reread Delay Disable
Immediate time out ◆
Short time out
Medium time out
Long time out
Force verification
0
1
2
3
4
5
Auto Power Off Duration Short ◆
Medium
Long
Extremely long
0
1
2
3