Need help?Do you have a question about the SICK IDM161 and is the answer not in the manual?
General| Protection Rating/Class | IP65 |
|---|---|
| Operating Temperature | 0 °C ... +50 °C |
| Light Source | LED |
| Interfaces | RS232, RS422, Ethernet |
| Power Supply | 10 V DC ... 30 V DC |
| Storage Temperature | –20 °C ... +70 °C |
Details connecting one scanner to one smart cradle for peer-to-peer communication.
Connects multiple scanners to one cradle and clones parameters between scanners.
Details using the scanner as a Bluetooth keyboard via HID service.
Guides on pairing and connecting scanners in HID, HID with Passkey, or HID Legacy modes.
Explains using the scanner as a Bluetooth Serial Device via SPP Master or Slave mode.
Enables storing barcode data for inventory and scanning quantity info.
Explains System Command, Family Code, and Option Code for scanner programming.
Explains programming categories (SS, MS, CS, DS) and the Program & End procedure.
Lists options for setting the scanner's communication interface with the host.
Selects the keyboard layout and language for scanner output.
Configures suffixes, preambles, FNC1 transmit, and Caps Lock behavior.
Configures handshaking protocols and NAK retry counts for serial communication.
Allows defining custom symbol IDs for specific barcode types.
Continues selection of readable barcode symbologies, including 2D and Postal codes.
Configures settings specific to Code 39 and Code 32 symbologies.
Configures Codabar and NW-7 symbology settings, including check digits and length.
Configures UPC-A and UPC-E symbologies, including expansion and standardization.
Configures EAN-13 and EAN-8 symbologies, including expansion and check digits.
Configures IATA and Interleaved 2 of 5 symbologies, including check digits.
Configures Code 25 symbologies like Standard/Industrial, Matrix, and China Postal.
Configures Code 11 and Code 93 symbologies, including check digits and lengths.
Configures MSI and Plessey symbologies, including check digits and lengths.
Configures Code 128 symbology, including ISBT concatenation and security levels.
Configures GS1-128 symbology, including special functions and edition modes.
Details operation modes like Low Power, Trigger, Presentation, and Alternative for corded scanners.
Enables batch scanning functionality for Bluetooth scanners.
Details data transmission, deletion, delimiters, and quantity output for batch scanning.
Enables scanning multiple barcodes sequentially with batch reading rules.
Edits scanned data by selecting symbologies and inserting characters at specific positions.
Provides advanced verification for error-free scanning using identified symbologies, lengths, and characters.
Edits scanned data by replacing characters at identified positions based on symbologies.
Edits scanned data by selecting symbologies and controlling transmitted data inclusion/exclusion.
Application example steps for configuring Data Formatter, Replacer, and Organizer.
Step-by-step guide for configuring corded scanners via the IDM Set Up Tool.
Step-by-step guide for configuring Bluetooth scanners via the IDM Set Up Tool.
Steps to upgrade firmware on IDM corded scanners using the Set Up Tool.
Steps to upgrade firmware on the IDM Bluetooth cradle.
Steps to upgrade firmware on IDM Bluetooth scanners using the Set Up Tool.
Lists system commands like PROGRAM, SYSLIST, Defaults, and FIN/END.
Additional system commands for IDM Bluetooth scanners (Sleep, Power Off, Paging, Clone).
To Next Page
