Bluetooth Operation Control (IDM Bluetooth series)
& IDM Bluetooth
© SICK AG · Germany · All rights reserved · Subject to change without notice
3.10.5 HID Link Quality, Power Saving Mode
Family Code Selection P.C. Parameter Selection Option Code
Link Quality Setting
SS Disable 0
SS Level 1 1
SS Level 2 2
SS Level 3 3
SS Level 4 4
Bluetooth Power Saving
Mode
SS Disable 0
SS Enable 1
Link Quality Setting
This function is only available for SPP and HID mode. When you use the scanner in the boundary of radio
signal, you can enable this function to
increase the reliability of data transmission. But this function will affect
the communication distance. The level is higher, the communication distance is shorter.
Bluetooth Power Saving Mode
The Bluetooth scanner will enter low power consumption mode when you enable this function.
To Next Page
Loading...
