SICK IDM161 - Buzzer, LED, and Vibrator Controls

Operation Control
Operating Instructions
IDM corded
& IDM Bluetooth
80
© SICK AG · Germany · All rights reserved · Subject to change without notice
8017159/142O/2019-05-23
3.9 Operation Control
3.9.1 Buzzer, Power On LED, Good read indicator, Vibrator Control
PROGRAM
F_DEFAULT
Family Code Selection P.C. Parameter Selection Option Code
Buzzer Tone Adjust
SS Buzzer tone – mute 0
SS Buzzer tone – low (Frequency 1.20 kHz) 1
SS Buzzer tone – medium (Frequency 2.70 kHz)  2
SS Buzzer tone – high(Frequency 2.81 kHz) 3
SS Buzzer tone - extremely high(Frequency 2.93 kHz) 4
SS Power-on/power-off beep  5
SS No power-on/power-off beep 6
Power On Indicator
SS Disable (LED off) 0
SS LED steady on  1
SS LED flash 2
IDM120 series doesn’t support this function.
Good Read Indicator
SS Disable
0
SS Enable  1
Vibrator Control
SS Disable 0
SS Enable  1
Only available for industrial series (IDMx6x).
Buzzer Volume:
Available for IDM 2xx-3