& IDM Bluetooth
© SICK AG · Germany · All rights reserved · Subject to change without notice
3.9.14 Scene mode
Family Code Selection P.C. Parameter Selection Option Code
Scene mode
SS Scene 1 0
SS Scene 2 1
SS Scene 3 2
SS Scene 4 3
SS Scene 5 4
SS Scene 6 5
SS Scene 7 6
Scene Mode optimizes the scanner's motion tolerance, scanning speed and scanning sensitivity in different
environments.
• Scene 1: This is the default setting. lt optimizes the scanner's motion tolerance, scanning speed and
scanning sensitivity in most working environments.
• Scene 2: When scanning high-density barcodes, you can set the scanner to "Scene 2"· to optimize
scanners' motion tolerance, scanning speed and scanning sensitivity.
• Scene 3: Scene 3 is for general retail applications. When scanning common retail barcodes, you can set
the scanner to "Scene 3" to optimize scanner's motion tolerance, scanning speed and scanning
sensitivity.
• Scene 4: Scene 4 is also for general retail applications. lt optimizes the scanner's sensitivity and speed
when scanning common retail barcodes. Moreover, it provides superior reading performance when
scanning barcodes from the screens of mobile devices, especially large screens or screens with low
brightness.
• Scene 5: Scene 5 is application-specific. lt optimizes the scanner's motion tolerance, scanning speed and
scanning sensitivity when scanning low PCS (print contrast) barcodes on circuit boards.
• Scene 6: Scene 6 is application-specific. lt optimizes the scanner's motion tolerance, scanning speed and
scanning sensitivity when scanning barcodes on circuit boards under sufficient ambient light.
• Scene 7: Scene 7 is application-specific. lt optimizes the scanner's motion tolerance, scanning speed and
scanning sensitivity when scanning barcodes from the screens of mobile devices.
To Next Page
Loading...
