Need help?Do you have a question about the SICK IDM140 Series and is the answer not in the manual?
General| Scanning Frequency | 50 Hz |
|---|---|
| Protection Rating | IP65 |
| Code resolution | 0.1 mm |
| Housing material | Plastic |
| Output | Digital |
| Operating Temperature | 0 °C ... +50 °C |
| Power Supply | 10 V to 30 V DC |
| Light source | LED |
| Interfaces | RS-232, USB, Ethernet |
| Bar code symbologies | EAN, UPC |
| 2D code symbologies | QR Code, Data Matrix |
| Storage Temperature | -20 °C ... +70 °C |
Details on connecting scanners via standard and industrial interfaces, including cable types and options.
Instructions for battery installation and charging for IDM Bluetooth scanners.
Overview of various radio link modes for Bluetooth scanners, including PAIR, PICO, SPP, and HID.
Enabling and using batch scanning for inventory applications, including data storage.
Introduction to system, family, and option codes for scanner programming.
Explanation of programming procedures like Single Scan, Multiple Scan, Cycling Scan, and Dual Level.
Selecting the host interface for the scanner, such as USB HID, RS-232, or PS/2.
Configuration of keyboard layout, preamble, postamble, and function key emulation.
Settings for serial interface, including suffix, preamble, postamble, and delay settings.
Configuration settings for Code 39 and Code 32 symbologies.
Configuration settings for Code 128 symbology, including security level.
Configuration settings for GS1-128 symbology, including special functions.
Operation modes for corded scanners: Low Power, Trigger, Presentation, Alternative, Flash, Force.
Bluetooth settings for out-of-range scanning, link supervision, and beeping notifications.
Configuration of Bluetooth device name and security settings, including PIN code.
Configuring preamble, postamble, data length, and symbology ID transmission.
Editing scanned data using insertion, deletion, and matching rules.
Advanced verification for error-free scanning and data filtering.
Replacing specific characters or data strings in scanned output.
Organizing scanned data, including forward/backward transmission and inclusion/exclusion.
Steps for configuring IDM scanners using the Set Up Tool software.
Instructions for upgrading scanner and cradle firmware using the IDM Set Up Tool.
List of system commands for scanner programming, defaults, and saving settings.
To Next Page
