SICK IDM140 Series User Manual

Operating Instructions
Programming Procedures
IDM corded
& IDM Bluetooth
8017159/2014-04-24
© SICK AG · Germany · All rights reserved · Subject to change without notice
29
3.2.5 Cycling Scan
Scan one of family
codes
Scan
„PROGRAM“
Scan one or several
option codes
Repeat
selection
Scan
„END“
Yes
No
Enter Programming mode.
Select the desired programming
family.
Select one or several option codes for
the desired parameters as “Single” or
“Multiple” scan selection.
Do you want to select another
programming family?
Exit programming mode.
Scan “FIN”
Finish cycling selection. (If necessary)

SICK IDM140 Series Specifications

General

Brand	SICK
Model	IDM140 Series
Category	Scanner
Language	English