What to do if SICK Relays have input error cross-circuit process error?
If SICK Relays show an input error due to a cross-circuit or process error, investigate the wiring for shorts and ensure correct circuit configurations.
What to do if SICK Relays have an input error?
If SICK Relays have an input error, verify the inputs for proper function or reset if necessary.
What to do if SICK RLY3-OSSD3 input error discrepancy time expired?
If SICK Relays have an input error because the discrepancy time expired, check the timer settings and ensure they are correctly configured.
General| Type | Safety relay |
|---|---|
| Safety Integrity Level | SIL3 |
| Performance Level | PL e |
| Category | 4 |
| Supply voltage | 24 V DC |
| Output type | OSSD (Output Signal Switching Device) |
| Number of channels | 2 |
| Protection class | IP20 |
| Connection type | Screw terminals |
| Contact configuration | 3 NO |
| Operating temperature | -25 °C to +55 °C |
Outlines critical safety precautions and hazards related to device integration.
Specifies the correct applications and sensor types for the safety relay.
Lists conditions and environments where the safety relay is not suitable.
Details the necessary expertise for different tasks involving the safety relay.
Highlights manufacturer obligations and safety responsibilities during planning.
Details wiring, enabling paths, diagnostic outputs, and interlocks for system integration.
Covers wiring requirements, voltage supply, and connection prerequisites for the device.
Defines the mandatory checks required before and after commissioning.
Highlights safety measures to follow when diagnosing and resolving issues.
To Next Page
