SICK SIG200

Table 3: USB Port (for configuration), M8
Pin Signal Description
1 + (L+) + 5 V DC nominal
2 - Data
3 + Data 0 V (logic ground)
4 M
2
1
4
3
Table 4: Profinet Port (P1/P2), M12 D-coded
Pin Signal Description
1 Tx+ Sender +
2 Rx+ Receiver +
3 Tx- Sender -
4 Rx- Receiver -
3
2
4
1
Table 5: IO-Link Ports (S1-S4) M12, A-coded, (Port Class A)
Pin Signal Description
1 + (L+) + 24 V DC nominal
2 DI Configurable as Digital Input
3 M 0 V (logic ground)
4 DI / DO or IO-Link Configurable as Digital Input or
Digital Output or IO-Link
5 n. c.
21
4
3
5
ELECTRICAL INSTALLATION 6
8024482.1FJ7 /2022-05-31 | SICK O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200
11
Subject to change without notice