For security reasons, changing the original default password is strongly recommended.
As of firmware version 1.2.0, you are automatically prompted to change the password
for the “Maintenance” user when logging in for the first time.
If you have changed and forgotten the password please contact SICK service for sup‐
port.
7.3
Configuration via REST API
The SIG200 provides a REST API with JSON data format for accessing the data of the
connected devices.
NOTE
Since firmware version 1.3, the SIG200 has also featured the JSON REST interface
defined by the IO-Link community in addition to the SICK-specific REST API interface.
This is specified in the document “JSON Integration for IO-Link” in version 1.0.0 (Mar
2020 Order No: 10.222).
These operating instructions provide an overview of the available device functions and
the access mechanisms.
7 SIG200 CONFIGURATION
26
O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200 8024482.1FJ7 /2022-05-31 | SICK
Subject to change without notice
To Next Page
Loading...
