SICK SIG200

3 Product description
3.1 Product description
The IO-Link-Master SIG200 is an intelligent gateway to connect IO-Link devices, input
and/or output signals for signal integration via REST API to a network. It was designed
for use in industrial environments that require up to an IP67 enclosure rating. There are
four IO-Link channels, each on a dedicated Port Type A M12 socket.
In addition, the SIG200 has a powerful user interface that can be accessed either via
USB using the SOPAS ET software from SICK or via Ethernet and any web browser. With
the integrated IODD interpreter, the SIG200 and the connected IO-Link devices can be
parameterized using the IODD file(s). The user interface also has a logic editor that can
be used to parameterize sensor/actuator systems based on the information provided.
3.2
Operating and status indicators
POWER
AUX
C/DI/DO1
DI
C/DI/DO1
DI
C/DI/DO1
DI
C/DI/DO
DI
LINK
ACT2
LINK
ACT1
AUX
POWER
/DO
DI
/DO
DI
/DO
DI
/DO
DI
LINK
ACT2
LINK
ACT1
SIG200
POWER CONFIG
S1
S2
S3
S4
P2
P1
1
2
â
á
8
9
ß
à
3
4
5
6
7
Figure 1: Dimensional drawing
1
POWER IN
2
IO-Link Port S1
3
IO-Link Port S2
4
IO-Link Port S3
5
IO-Link Port S4
6
Ethernet Port P2
7
Ethernet Port P1
8
DI: LED for pin 2
9
C/DI/DO LED for pin 4
ß
Mounting hole for front mounting
3 PRODUCT DESCRIPTION
6
O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200 8024482.1FJ7 /2022-05-31 | SICK
Subject to change without notice