SICK SIG200 - Page 88

Description Invert the input signal with a logical NOT.
Number of inputs 1
Input data type 1-bit (future extension: or n-bit)
Input description levelA: first input value
Number of outputs 1
Output data type Identical to input data type
Output description level: the input signal will be inverted with a logical not. Exam‐
ple: a high signal gets converted into a low signal.
Settings No settings available
AND
Table 25: Thruth table
Input
A
Input
B
Out‐
put
1 1 1
1 0 0
0 1 0
0 0 0
Description Combine the input signals with a logical AND.
Number of inputs 4
Input data type 1-bit (future extension: n-bit)
Input description levelA: first input
levelB: second input
levelC: third input
levelD: fourth input
Maximum 4 inputs can be linked together. If you want to link
more signals, you can work with several AND blocks.
Number of outputs 1
Output data type Identical to input data type
Output description level: the output depends on the various inputs. For more
information see truth table
Settings No settings available
OR
Table 26: Thruth table
Input
A
Input
B
Out‐
put
1 1 1
1 0 1
0 1 1
0 0 0
Description Combine the input signals with a logical OR.
Number of inputs 4
Input data type 1-bit (future extension: n-bit)
Input description levelA: first input
levelB: second input
levelC: third input
levelD: fourth input
Maximum 4 inputs can be linked together. If you want to link
more signals, you can work with several OR blocks.
Number of outputs 1
Output data type Identical to input data type
Output description level: the output depends on the various inputs. For more
information see truth table
Settings No settings available
8 DEVICE FUNCTIONS
88
O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200 8024482.1FJ7 /2022-05-31 | SICK
Subject to change without notice