Sicma S.p.A.
Miglianico (CH)
page 26
CUTTERS/HAMMERS CHECK
To assure a perfect functioning of the machine, check often (at least every 50 hours of work) that
the shredder’s hammers are in good condition and perfectly fixed by the locking bolts; in case they
are broken replace them with new spare parts.
For any cutter or hammer replacements please contact the nearest SICMA authorized service.
Before starting the inspection of cutters and hammers, stop
engine, pull parking brake and disengage power takeoff; lift
then the shredder with the tractor elevator and place it on
rests to avoid an accidental fall.
Picture
6
Picture
To Next Page
Loading...
