Sicma S.p.A.
Miglianico (CH)
page 8
IMPROPER USE
When using SICMA shredders it is particularly forbidden:
- The attachment to vehicles of unsuitable power or weight.
- To assemble the machine without securing the rebound tie rods of the three-point hitch of
the tractor’s elevator.
- To work in excessively stony grounds
- To use the machine without inserting the check-pins when supplied.
- To work in excessive slopes.
- To lift the machine when the power takeoff is engaged.
- To approach the machine when wearing inappropriate work clothing.
To get on the machine while it is being used or transported
Technical features
Manufacturer:
Sicma S.p.A.
Via Cerreto,19 | 66010 MIGLIANICO (CH)
Tel. +39 0871 95841 | fax +39 0871 950295
VAT no. 00227220696
Internet: www.sicma.it
e-mail: sicma@sicma.it
MODEL
TB-110 TB-125 TB-140 TB-155
Total width mm
1225 1377 1529 1681
Working width mm
1100 1250 1400 720
Length mm
720 720 720 720
Height mm
700 700 700 700
No. of tools
Smooth
hammers 26 30 34 38
Toothed
hammers
- - - -
Knives 52 60 68 76
Minimum power
required by tractor
HP 15-35 15-35 15-35 15-35
Connection to
tractor
cat 1
nd
1
nd
1
nd
1
nd
PTO speed rpm
540-
1000
540-
1000
540-
1000
540-
1000
Shaft rotation rpm
2080 2080 2080 2080
Weight (manual
traversable)
kg
158 173 188 203
lbs
348 381 414 447
Weight ( Hydraulic
traversable)
kg
153 168 183 189
lbs
337 370 403 436
To Next Page
Loading...
