EasyManua.ls Logo

Side-Power SE 30/125 S User Manual

Side-Power SE 30/125 S
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Keep this
manual onboard !
SIDE-
POWER
Thruster systems
Installation and user's manual
GB
N
Installasjons og brukermanual
Made in Norway
©
Sleipner Motor AS 2008
SLEIPNER MOTOR AS
P.O. Box 519
N-1612 Fredrikstad
Norway
Tel: +47 69 30 00 60
Fax: +47 69 30 00 70
w w w . s i d e - p o w e r . c o m
sidepower@sleipner.no
SE 30/125 S
SE 40/125 S
SE 60/185 S
Question and Answer IconNeed help?

Do you have a question about the Side-Power SE 30/125 S and is the answer not in the manual?

Side-Power SE 30/125 S Specifications

General IconGeneral
Thrust at 12V30 kg
Inner tunnel diameter125 mm
Weight9.5 kg
Voltage12V
Propeller Diameter125 mm
Maximum Thrust30 kg
Control OptionsJoystick, Remote Control
Typical ApplicationBow thruster for small boats

Summary

Planning and Important Precautions

Tunnel and Thruster Positioning

Tunnel End Shaping

Benefits of Rounded Tunnel Ends

Explains how rounded ends improve thrust and reduce noise by preventing cavitation.

Preventing Tunnel Drag

Tunnel Installation in Sailboats

General Tunnel Installation

Fibreglass Tunnel Installation Procedure

Step-by-step guide for fibreglass fitting of the tunnel to the hull.

Tunnel Installation Finishing

Tunnel Edge Finishing and Waterproofing

Instructions on softening tunnel edges and applying waterproofing layers.

Gearhouse and Motor Bracket Fitting

Gearhouse Assembly and Securing

Instructions for assembling the gearhouse, motor bracket, and tightening.

Propeller Fitting

Propeller Installation Procedure

Detailed steps for fitting propellers for different models and securing them.

Electromotor Fitting

Electromotor Mounting and Alignment

Steps for mounting the electromotor, aligning driveshafts, and initial fastening.

Electrical Installation

Control Panel and Wiring

Visual Wiring Diagram

Visual Electrical Wiring Diagram

Illustrates the electrical connections for the thruster system.

Technical Wiring Diagram

Detailed Technical Wiring Diagram

Provides a detailed schematic of the thruster system's electrical connections.

Installation Checklist

Important User Precautions

Safety and Power Control Procedures

Essential safety measures for operating the thruster, including power shut-off.

How to Use Sidepower Thrusters

Maintenance

Troubleshooting

Troubleshooting: No Thrust or Incorrect Direction

Addresses issues like motor running without thrust or thruster not starting/working one way.

Troubleshooting: Performance and Intermittent Issues

Covers low performance, short run times, and solenoid lock-in problems.

Troubleshooting: Further Checks and Solutions

Troubleshooting Checks for Thrust and Direction

Detailed checks for issues related to thrust, direction, and starting.

Troubleshooting Checks for Performance and Timing

Specific checks for low performance, short run times, and solenoid lock-in.

Warranty Statement

Related product manuals