Side-Power SP 200 TCi User Manual

Keep this
manual onboard !
SIDE-
POWER
Thruster systems
D
Installations- und Bedienungsanleitung
Installation and user's manual
GB
Made in Norway
©
Sleipner Motor AS 2004
SLEIPNER MOTOR ASSLEIPNER MOTOR AS
SLEIPNER MOTOR ASSLEIPNER MOTOR AS
SLEIPNER MOTOR AS
P.O. Box 519
N-1612 Fredrikstad
Norway
Tel: +47 69 30 00 60
Fax:+47 69 30 00 70
www.side-power.com
sidepower@sleipner.no
SP 155 TC i/ SP 200 TCi
SP 240 TCi / SP 285 TCi

Side-Power SP 200 TCi Specifications

General

Brand	Side-Power
Model	SP 200 TCi
Category	Outboard Motor
Language	English

Summary

Declaration of Conformity

Technical Specifications

Motor and Gearhouse Details

Specs for the DC motor, gearbox materials, and bearings.

Bracket, Tunnel, and Propeller

Details on motor bracket, tunnel type, and propeller construction.

Battery and Safety Features

Battery capacity recommendations and integrated safety mechanisms like thermal cut-off.

Installation Planning and Precautions

Pre-Installation Requirements

Essential steps before installation, including reading the manual and checking compartment suitability.

Installation Environment Considerations

Guidelines for safe installation location, avoiding hazards, and regulatory compliance.

Thruster Positioning and Tunnel Length

Optimal Thruster Placement

Positioning thruster forward and deep for maximum leverage, thrust, and efficiency.

Tunnel Length Optimization

Guidance on selecting tunnel length to avoid friction and cavitation.

Tunnel End Shaping for Performance

Benefits of Rounded Tunnel Ends

Rounding tunnel ends improves thrust and reduces noise by preventing turbulence.

Angled Tunnel Ends for Thrust

Angled ends can draw water from the hull side, providing additional thrust.

Minimizing Tunnel Drag

Hull Recess for Drag Reduction

Creating a hull recess behind the tunnel eliminates drag and improves flow.

Using a Spoiler for Waterflow

A deflector or spoiler can manage waterflow to reduce drag.

Tunnel Installation in Sailboats

Adapting to Sailboat Hull Designs

Special installation techniques for racing hulls to maintain boat performance.

Sailboat Installation Method

Integrating the tunnel into the hull structure for optimal performance and minimal speed loss.

Series Production Tunnel Installation

Hull Mould Integration for Efficiency

Utilizing mould inserts for streamlined and cost-effective tunnel installation.

Advantages of Production-Line Installation

Benefits include faster installation, reduced costs, and optimized tunnel fit.

General Tunnel Installation Guide

Fibreglass Fitting Recommendations

Emphasizes professional fibreglass work for a watertight and durable tunnel installation.

Cutting and Fitting the Tunnel

Step-by-step instructions for marking, cutting, and preparing the hull for the tunnel.

Tunnel Installation Finishing

Tunnel End Finishing and Waterproofing

Details on shaping tunnel ends and applying exterior layers for complete waterproofing.

Maintaining Tunnel Waterproofing

Guidance on preserving the waterproof integrity of the original tunnel.

Gearhouse and Motor Bracket Installation

Positioning and Fastening Gearhouse

Instructions for marking, drilling, and fitting the gearhouse and motor bracket.

Ensuring Proper Seal and Fit

Tips for a secure fit, proper oil filling, and effective sealing of components.

Oil Tank and Propeller Installation

Oil Tank Mounting and Plumbing

Proper placement and connection of the oil tank and tube for consistent oil supply.

Propeller and Anode Installation

Correctly mounting propellers and securing the zinc anode with thread lock.

Electric Motor Installation

Attaching Motor and Support

Securely fitting the motor to the bracket and installing the motor support.

Propeller Guard Considerations

Advice on using propeller guards in specific shallow water conditions.

Electrical Installation and Wiring

Cable and Battery Sizing Guidelines

Selecting appropriate cables and batteries for optimal voltage and performance.

Main Switch and Fuse Installation

Installing safety switches and fuses for electrical system protection.

Control Panel and Wiring Installation

Control Panel Setup and Location

Installing control panels for easy access and integrating multiple panels.

Wiring Pin Configuration Details

Understanding the pin layout for connecting controls to the thruster system.

SP 285 TCI Electrical System

48V System Requirements

Necessary components for 48V operation, including a voltage converter and extra battery.

Optimizing Battery and Cable Performance

Ensuring sufficient voltage by using high-capacity batteries and thick cables.

Installation Checklist and Final Inspection

Pre-Installation Checks

Verifying correct installation of all components, from propeller to electrical connections.

Final Testing and Verification

Performing system checks and tests to ensure proper function before delivery.

User Safety and Operational Precautions

Safe Operation Practices

Key safety measures including knowing the main switch, turning off power, and avoiding operation near people.

Performance and Troubleshooting Tips

Advice on maintaining performance through proper battery use and addressing issues promptly.

Operating Sidepower Thrusters

Using the Bow Thruster

Step-by-step guide for turning on, testing, and maneuvering with the bow thruster.

Combined Bow and Stern Thruster Operation

How to utilize both bow and stern thrusters for advanced maneuverability.

Maintenance and Service Schedule

Routine Maintenance Tasks

Essential checks and actions like oil changes, bolt tightening, and cleaning.

Zinc Anode and Battery Checks

Procedures for replacing the zinc anode and checking battery condition.

Troubleshooting Common Issues

No Thrust or Direction Problems

Diagnosing and resolving issues related to thrust, direction, and electrical faults.

Low Performance and Solenoid Issues

Addressing problems like low performance, solenoid clicking, and auto-stop.

Product Warranty and Claims

Warranty Terms and Coverage

Outlines the two-year warranty, its transferability, and exclusions.

Making a Warranty Claim

Procedure for submitting a claim, including documentation and returning defective parts.

Spare Parts Identification - SP 155 TCI

Motor and Control System Parts

Part numbers for electric motor, solenoids, control box, and wiring loom.

Gearhouse and Propeller Assembly Parts

Part numbers for gearhouse, oil system, seals, anodes, and propeller components.

Spare Parts Identification - SP 200 TCI

Motor and Electrical Components

Part numbers for the motor, solenoids, control box, and associated electrical parts.

Gearbox and Propeller Assembly Components

Part numbers for gearbox, oil system, seals, anodes, and propeller parts.

Spare Parts Identification - SP 240 TCI

Motor, Control, and Coupling Parts

Part numbers for motor, electronics, solenoids, and flexible coupling.

Gear Leg and Propeller Components

Part numbers for gear leg, oil system, seals, anodes, propeller, and fasteners.

Spare Parts Identification - SP 285 TCI

48V Motor and Control System Parts

Part numbers for the 48V motor, control box, solenoids, and wiring.

Gearhouse and Propeller System Parts

Part numbers for gearhouse, oil system, seals, anodes, and propeller assembly.

Global Service Network

Authorized Service Centre Listings

Contact information for worldwide authorized service centres.