Side-Power SE80/185T - User Manual

Made in Norway
©
Sleipner Motor AS version 1.0 - 2007
®
SE80/185T & SE100/185T
Ignition Protected
thruster assembly
SIDE-
POWER
SLEIPNER MOTOR AS
P.O. Box 519
N-1612 Fredrikstad
Norway
Tel: +47 69 30 00 60
Fax: +47 69 30 00 70
Installation and user manual
w w w . s i d e - p o w e r . c o m
s i de po w er @s le i pn er. n o
Keep this
manual onboard !

Side-Power SE80/185T Specifications

General

Brand	Side-Power
Model	SE80/185T
Category	Outboard Motor
Language	English

Summary

Technical Specifications

Stern Thruster Installation Considerations

Bolt-On Installation of Stern Tunnel

Mould-On Installation of Stern Tunnel

Fitting Gearhouse and Motor Bracket

Fitting Propellers

Fitting the Electromotor IP Assembly

Electrical Installation

Battery and Cable Recommendations

Main Switch and Fuse

Proper installation of main switch and fuse for safety and protection.

Control Panel and Control Leads

Visual Wiring Diagram

Technical Wiring Diagram

Electrical Installation of Stern Thruster Systems

Installation Checklist

Important User Precautions

Safety Warnings

Critical warnings regarding tampering, disassembly, and potential explosion hazards.

How to Use Sidepower Thrusters

How to Use a Bow Thruster

How to Use Bow and Stern Thrusters Combined

Maintenance

Seasonal Checks and Cleaning

Maintenance Warning

Critical warnings regarding tampering, disassembly, and potential explosion hazards.

Troubleshooting

Electromotor Runs, No Thrust

Diagnosing and resolving issues where the motor runs but no thrust is produced.

Thruster Does Not Start or Works in One Direction

Troubleshooting steps for thrusters that fail to start or operate in only one direction.

Unexpected Low Performance

Intermittent Operation (0.5 s every 4 s)

Solenoid Lock-in; Auto Stop