Side-Power SP 125 T User Manual

SIDE-
POWER
Thruster systems
Keep this
manual onboard !
D
Installations- und Bedienungsanleitung
Installation and user's manual
GB
N
Installasjons og brukermanual
F
Manuel d'installation et d'utilisation
I
Manuale d'istallazione e d'uso
FI
Asennusohje ja käyttäjän käsikirja
Made in Norway
©
Sleipner Motor AS 2002
SLEIPNER MOTOR AS
P.O. Box 519
N-1612 Fredrikstad
Norway
Tel: +47 69 30 00 60
Fax:+47 69 30 00 70
www.side-power.com
sidepower@sleipner.no
SP 75 T
SP 95 T
SP 125 T

Side-Power SP 125 T Specifications

General

Brand	Side-Power
Model	SP 125 T
Category	Outboard Motor
Language	English

Summary

Technical Specifications

Planning and Important Precautions

Tunnel/Thruster Positioning

Optimal Tunnel Length

Discusses friction and cavitation based on tunnel length for optimal performance.

Tunnel Ends Design

Preventing Drag from Tunnel

Tunnel Installation in Sailboats

Tunnel Installation Procedure

Tunnel Ends Finishing

Describes rounding tunnel edges and casting outer layers for waterproofing.

Fitting Gearhouse and Motor Bracket

Fitting Oil Tank and Propeller

Fitting the Electromotor

Electrical Installation

Control Panel and Leads

Visual Wiring Diagram

Technical Wiring Diagram

Installation Checklist

Important User Precautions

How to Use Sidepower Thrusters

Using a Bow Thruster

Instructions for operating the bow thruster using control panels.

Using a Stern Thruster

Instructions for operating a stern thruster when installed.

Combined Bow and Stern Thruster Use

Explains combined operation for total maneuverability.

Maintenance

Troubleshooting

No Thrust Despite Motor Running

Explains causes and solutions when the motor runs but there is no thrust.

Thruster Not Starting or One-Direction Operation

Addresses issues with the thruster not starting or only working in one direction.

Low Thruster Performance

Details checks for low performance, including voltage and brush issues.

Warranty Statement

Service Centres