Siemens 6ES7647-0BA00-0YA2 - Page 49

Technical specifications
9.1 General technical specifications
SIMATIC IOT2050
Operating Instructions, 03/2020, A5E39456816-AA
49
Motherboard
Processor
• 6ES7647-0BA00
-
0YA2: TI Sitara AM6528 GP, 1000 MHz
• 6ES7647-0BA00
-
1YA2: TI Sitara AM6548 HS, 1000 MHz
RAM
• 6ES7647-0BA00
-
0YA2: 1 GB
• 6ES7647-0BA00
-
1YA2: 2 GB
BIOS SPI Flash
16 MB
Micro SD
Slot for one Micro SD card
Nano SIM card Slot for one Nano SIM card
EMMC
• 6ES7647-0BA00
-
0YA2: No
• 6ES7647-0BA00
-
1YA2: 16 GB
Expansion slots 1 x Arduino shield
1 x mini PCIe for PCIe cards 30 x 50.59 mm or 30 x 26.8 mm
via adapter
Interfaces
All devices of the type SIMATIC IOT2050
USB Type A, X60
2 x USB 2.0 host, high current, max. 2.5 W/500 mA
Display port, X70
Display port interface
LAN interface
P1 - X1 LAN - P2, RJ45
1
1 GB LAN port
COM X30
• RS232
2
, max. 115 Kbps, D-sub connector, 9-pin
• RS422
2 3
, max. 115 Kbps, D-sub connector, 9-pin
• RS485
2 3
, max. 115 Kbps, D-sub connector, 9-pin
1
For unique labeling, the LAN interfaces are numbered on the enclosure. The numbering by the
operating system can differ.
2
You can use any COM port as an RS232, RS422 or RS485 interface through the software-
controlled interface parameter assignment.
3
Termination can be set with the software.
Additional information on parameter assignment is available in the SIMATIC IOT2000-
Forum, see section "Software and commissioning (Page 28)".