Siemens 6ES7647-0BA00-0YA2 - Page 53

Hardware descriptions
10.1 Motherboard
SIMATIC IOT2050
Operating Instructions, 03/2020, A5E39456816-AA
53
Component/interface
Description / inscription
Meaning, comment
H2800
LEDs
PWR
Power (green)
H1801 STAT OS is running (Green Blink).
OS is not running (Red blink).
H1300
USER1
User LED (green/red/orange), programmable
H3300
USER2
User LED (green/red/orange), programmable
S1
RESET
For a reset of the CPU
S2
USER
Status can be queried with programming
X1
Ethernet 1 and Ethernet 2
X30
COM D-Sub9
X60
USB A Host
X70
Display port
X14
UART Debug
X40
Battery-Con
X50
µSD slot
X11, X13
Arduino, 8-pin (2x)
X10
Arduino, 10-pin
X12
Arduino, 6-pin
X15
ICSP
Part of Arduino Interface
X17
DediProg Con
X80
Power supply
X83 Jumper 3 pin SMD Jumper defines IO voltage for Arduino shield:
• Jumper on pins 1-2: 5 V
• Jumper on pins 2-3: 3.3 V
X1500 Jumper 3 pin SMD Jumper defines Flash write protection enable
or disable:
• Jumper on pins 1-2: write protection ena-
ble
• Jumper on pins 2-3: write protection disa-
ble
Note
: flash write protection jumper should be
in write protection enabled state (pins 1-2)
during normal operation.
X100
MiniPCIe Con.
X103
Nano SIM Con.
X82 VIN Separation (power sup-
ply, 24 V DC)
Jumper defines VIN connection to the Arduino
shield:
• Jumper on pins 1-2: VIN is connected to
the Arduino shield
• Jumper on pins 2-3: VIN is not connected
to the Arduino shield