Need help?Do you have a question about the Siemens 6SL3210-1KE12-3AF2 and is the answer not in the manual?
General| Rated Power | 1.5 kW |
|---|---|
| Protection | IP20 |
| Storage Temperature | -40°C to +70°C |
| Input Voltage | 3AC 380-480V |
| Relative Humidity | 5% to 95% (non-condensing) |
| Shock Resistance | 15g, 11ms |
Lists PM240-2 power modules by voltage, frame size, power, and filter type.
Details control units (CU) and adapters (CUA) for SINAMICS G120/G120C/S120 in marine applications.
Describes BOP-2 and IOP-2 operator panels for SINAMICS G120/G120C, including marine installation notes.
Lists G120C compact converters by voltage, frame size, power, communication, and filter options.
Ambient temperature effects on marine vessels and potential derating for converters.
Risk of condensation on board marine vessels and necessary protective measures.
States that the occurrence of salt mist is not permissible for the converters.
Covers vibration stress from onboard systems and the need for reinforced control cabinets.
Discusses EMC immunity requirements for marine applications and compliance.
Differentiates emitted interference for device types and zones according to IEC standards.
Explains marine power supply instability and the need for careful consideration.
Details control cabinet protection against pollution, water, and access to active parts.
Explains reinforced cabinet design due to vibration stress, using Rittal TS8 as an example.
Details separate installation of Control Units from Power Modules due to vibration stress.
Describes installing BOP-2/IOP-2 panels in cabinet doors using a door mounting kit.
Discusses cabinet ventilation for power loss dissipation and air intake/discharge requirements.
Explains using external 24-V-DC supply for control units, requiring PELV specifications.
To Next Page