Need help?Do you have a question about the Siemens 6SL3210-1KE13-2AF2 and is the answer not in the manual?
General| Article Number | 6SL3210-1KE13-2AF2 |
|---|---|
| Degree of protection | IP20 |
| Input voltage | 380 ... 480 V 3 AC |
| Input frequency | 47 ... 63 Hz |
| Storage Temperature | -40°C to +70°C |
| Relative Humidity | 95 % |
Overview of PM240-2 Power Modules, including voltage, frame size, power range, and integrated filter options.
Details on SINAMICS Control Units (CU230P-2, CU240E-2, CU250S-2) and adapters (CUA20, CUA31, CUA32).
Information on available operator panels like BOP-2 and IOP-2 for SINAMICS converters.
Technical specifications of G120C compact converters, covering voltage, power, communication, and filter types.
Discusses ambient temperature impact on converter performance and potential derating in marine environments.
Addresses the risk of condensation in marine vessels and necessary protective measures for built-in converters.
States that salt mist occurrence is not permissible for the components.
Explains vibration stress from onboard systems and the need for reinforced cabinet design.
Covers converter suitability for marine environments regarding interference immunity per IEC standards.
Differentiates emitted interference for different voltage devices and filter requirements.
Highlights weaker marine power supplies, short-circuit ratio, and voltage/frequency stability.
Details control cabinet protection requirements against pollution, water, and access to active parts.
Specifies the need for reinforced control cabinet frames due to vibration stress.
Guidance on installing Control Units separately from Power Modules to mitigate vibration.
Describes installing operator panels (BOP-2, IOP-2) in control cabinet doors.
Outlines requirements for ventilating control cabinets to dissipate power loss.
Explains connecting an external 24-V-DC auxiliary power supply for Control Unit operation.
To Next Page