Need help?Do you have a question about the Siemens 6SL3210-1KE14-3UF2 and is the answer not in the manual?
General| Product Type | Media Converter |
|---|---|
| Manufacturer | Siemens |
| Model Number | 6SL3210-1KE14-3UF2 |
| Degree of Protection | IP20 |
| Braking Chopper | integrated |
| Input Frequency | 47 ... 63 Hz |
| Storage Temperature | -40 to +70 °C |
| Relative Humidity | 5 to 95%, non-condensing |
| Certification | CE, UL |
| Input Voltage | 380-480V AC |
| Frame Size | Size A |
Explains warning symbols and their meanings for safety and property damage.
Emphasizes adherence to safety instructions to prevent severe injuries or death.
Warns about serious injury or death from improper handling of Power Modules.
Details PM240-2 Power Modules, including voltage, frame size, power range, and filter.
Lists Control Units and adapters for SINAMICS converters used in marine applications.
Describes BOP-2 and IOP-2 operator panels for SINAMICS converters and their article numbers.
Overview of G120C compact converters, including power, communication, and filter options.
Explains using Adapter Kits to separate Control Units from Power Modules in marine applications.
Advises installing operator panels in control cabinet doors for marine applications.
Discusses ambient temperature effects and potential derating for marine converter installations.
Addresses condensation risks in marine environments and necessary protective measures for components.
States that salt mist is not permissible for the converters in marine applications.
Details vibration impact and the need for reinforced control cabinets and component separation.
Covers EMC immunity requirements and installation for marine converter applications.
Specifies requirements for emitted interference according to standards for marine applications.
Discusses weaker and less stable marine power supplies and their impact on converters.
Outlines protection needs for cabinets against pollution, water, and condensation in marine environments.
Explains the need for reinforced control cabinets to handle vibration stress in marine applications.
Details the separate installation of Control Units from Power Modules to mitigate vibration effects.
Describes installing operator panels (BOP-2, IOP-2) in control cabinet doors for marine use.
Discusses ventilation requirements for control cabinets to dissipate power loss in marine applications.
Covers connecting an external 24-V-DC auxiliary power supply for Control Unit operation.
To Next Page