Model Designations and Specifications UMSITRPDS3-1
November 2010
9-6
Wetted parts materials
• Connection shank Stainless steel, mat. No. 1.4404/316L or Hastelloy C4, mat. No. 2.4610
• Oval flange Stainless steel, mat. No. 1.4404/316L
• Seal diaphragm Stainless steel, mat. No. 1.4404/316L or Hastelloy C276, mat. No. 2.4819
Measuring cell filling Silicone oil or inert filling liquid
Process connection Connection shank G1/2A to DIN EN837-1, female thread 1/2-14 NPT or oval flange
to DIN 19213 with mounting thread M10 or 7/16-20 UNF to EN 16518
Power Supply U
H
Terminal voltage at transmitter 10.5 to 45 Vdc; 10.5 to 30 Vdc in intrinsically-safe mode
Certificate and approvals
See Table 9-20.
HART communication
HART communication 230 to 1100 Ω
Protocol HART Version 5.x
Software for computer SIMATIC PDM
To Next Page
Loading...
