Siemens 7MF4633 - 9.4 Models 7 MF4433 and 7 MF4533, Differential Pressure and Flow

UMSITRAPDS3-1 Model Designations and Specifications
November 2010
9-17
9.4 MODELS 7MF4433 AND 7MF4533, DIFFERENTIAL PRESSURE AND FLOW
This section contains a dimension drawing of the transmitter (with the H03 option). A dimension drawing
of the standard model is found in Figure 9-3. This section also contains a model designation table and
performance specifications.
1
2
3
4
5
10
11
Process connection ¼ -18NPT
Mounting thread M10 or 7/16 –20 UNF
Connection side
Electronics side, digital display
Sealing screw
Blanking plug (only for PG 13.5 and Han 7D)
Access cover over magnetic pushbuttons
12 Electrical connection:
Cable gland Pg 13.5
1, 2
M20 x 1.5
2
or ½ - 14 NPT or Han 7D plug
1, 2
1 – not for explosion proof degree of protection
2 – not in FM exp/CSA degree of protection
This Figure is for Models 7MF4433 and 7MF4533 with
H03 option.
FIGURE 9-4 Models 7MF4433 and 7MF4533, Dimensions, With H03 Option