Siemens ACUSON P300 - Selective Deletion of Measurements; Calculation Reports

ACUSON P300™ Ultrasound System Quick Reference Guide
Page | 12
© Siemens 2012. All rights reserved.
*The ACUSON P300 System is not commercially available.
Due to regulatory reasons its future availability cannot be guaranteed.
Sharpness
Accentuates the edges
and the small differences
in M-mode
 Rotate S wheel to SHARPNESS and press S button

Rotate S wheel to adjust
 Range: 1-5
Sweep
 Rotate S wheel to SWEEP and press S button
 Rotate S wheel to adjust
Triplex (PLEX)
 Rotate S wheel to PLEX and press S button
Frequency
 Rotate S wheel to FREQUENCY and press S button
 Rotate S wheel to adjust
Format
 Rotate S wheel to B FORMAT and press S button
 Rotate S wheel to adjust
 Range: SMALL, MEDIUM, LARGE, and DUAL
Dynamic Range
Adjusts grayscale levels

Rotate S wheel to DYN RANGE and press
S
button

Rotate S wheel to adjust
Performing Measurements and Calculations
Measurements can be made on frozen, stored and archived images.
Labeled Measurements
Generic Measurements
Activate Calculations
Press MEASURE (Label) to activate the labeled measurement function on frozen 2D,
Color, PW or M-mode images
or
Press to go to generic measurements
Perform a Generic Measurement
Freeze image
Press
Select desired generic measurement and press Right Select
Place the first caliper and press Right Select
Place second caliper and press Right Select