Siemens ACUSON P300 - Measurements and Calculations; Performing Measurements

ACUSON P300™ Ultrasound System Quick Reference Guide
Page | 11
© Siemens 2012. All rights reserved.
*The ACUSON P300 System is not commercially available.
Due to regulatory reasons its future availability cannot be guaranteed.
levels
Colorize (Tint)
Sets the chromatic scale
active in CW
 Rotate S wheel to COLORIZE and press S button
 Rotate S wheel to adjust

Range: Off(-), Orange, Indigo, Magenta, Blue, Yellow,
RGB
Filter
Filters Doppler signal
 Rotate S wheel to FILTER and press S button
 Rotate S wheel to adjust
Reject
Improves spectral curve
display
 Rotate S wheel to REJECT and press S button
 Rotate S wheel to adjust
Sweep
 Rotate S wheel to
SWEEP
and press S button
 Rotate S wheel to adjust
M-mode
Items in table are not arranged sequentially
To Adjust / Control Do This
Engage M-mode  Press M-MODE
Overall Gain
 Rotate AUTO/GAIN wheel
B-Ref
Alternates between split
screen or full screen in M -
mode
 Rotate S wheel to B-REF and press S button
Gray Maps
Applies a post processing
curve that assigns echo
amplitudes to grayscale
levels
 Rotate S wheel to GRAY MAP and press S button
 Rotate S wheel to adjust
Colorize (Tint)
Sets the chromatic scale
active in M-mode
 Rotate S wheel to COLORIZE and press S button
 Rotate S wheel to adjust

Range: Off(-), Orange, Indigo, Magenta, Blue, Yellow,
RGB