Siemens ACUSON P300 - CW Doppler Operations

ACUSON P300™ Ultrasound System Quick Reference Guide
Page | 10
© Siemens 2012. All rights reserved.
*The ACUSON P300 System is not commercially available.
Due to regulatory reasons its future availability cannot be guaranteed.
CW Doppler
(Phased array transducers only)
CW Doppler audio volume can be decreased or increased by pressing or .
Items in table are not arranged sequentially
To Adjust / Control Do This
Engage CW Doppler  Press UPDATE/LINE to activate cursor
 Roll the trackball to position cursor
 Press the CW control to activate
Auto-Doppler Optimization
 Press AUTO
B-Ref
Alternates between split
screen or full screen in
CW

Rotate S wheel to B-REF and press S button
Velocity (PRF/Scale)
 Rotate S wheel to VELOCITY and press S button

Rotate S wheel to adjust
Baseline
 Rotate S wheel to BASEL and press S button

Rotate S wheel to change
Invert (Reverse)
 Rotate S wheel to REVERSE and press S button
Frequency
 Rotate S wheel to FREQUENCY
,
press S button
 Rotate S wheel to adjust
Format
 Rotate S wheel to B FORMAT and press S button
 Rotate S wheel to adjust
 Range: SMALL, MEDIUM, LARGE, and DUAL
Dynamic Range
Adjusts grayscale levels

Rotate S wheel to DYN RANGE and press
S
button

Rotate S wheel to adjust
Gray Maps
Post processing curve
that assigns echo
amplitudes to grayscale
 Rotate S wheel to GRAY MAP and press S button
 Rotate S wheel to adjust

Range: 1-5