Siemens ACUSON P300 - Page 10

ACUSON P300™ Ultrasound System Quick Reference Guide
Page | 9
© Siemens 2012. All rights reserved.
*The ACUSON P300 System is not commercially available.
Due to regulatory reasons its future availability cannot be guaranteed.

Rotate S wheel to change
SV Size (Gate)
 Rotate S wheel to SV SIZE and press S button

Rotate S wheel to adjust
Θ Angle
 Rotate S wheel to
Θ
ANGLE and press S button
 Rotate S wheel to adjust
D-Steer
 Rotate S wheel to D-STEER and press S button
 Rotate S wheel to adjust
 Color ROI and PW cursor will steer together
Invert (Reverse)
 Rotate S wheel to REVERSE and press S button
Triplex (PLEX)
 Rotate S wheel to PLEX and press S button
Frequency
 Rotate S wheel to FREQUENCY
,
press S button
 Rotate S wheel to adjust
Format
 Rotate S wheel to B FORMAT and press S button
 Rotate S wheel to adjust
 Range: SMALL, MEDIUM, LARGE, and DUAL
Dynamic Range
Adjusts grayscale levels

Rotate S wheel to DYN RANGE and press
S
button

Rotate S wheel to adjust
Gray Maps
Post processing curve
that assigns echo
amplitudes to grayscale
levels
 Rotate S wheel to GRAY MAP and press S button
 Rotate S wheel to adjust

Range: 1-5
Colorize (Tint)
Sets the chromatic scale
active in PW
 Rotate S wheel to COLORIZE and press S button
 Rotate S wheel to adjust

Range: Off(-), Orange, Indigo, Magenta, Blue, Yellow,
RGB
Filter
Filters Doppler signal
 Rotate S wheel to FILTER and press S button
 Rotate S wheel to adjust
Reject
Improves spectral curve
display
 Rotate S wheel to REJECT and press S button
 Rotate S wheel to adjust
Sweep
 Rotate S wheel to
SWEEP
and press S button
 Rotate S wheel to adjust