Siemens ACUSON P300 - PW Doppler Operations

ACUSON P300™ Ultrasound System Quick Reference Guide
Page | 8
© Siemens 2012. All rights reserved.
*The ACUSON P300 System is not commercially available.
Due to regulatory reasons its future availability cannot be guaranteed.

Rotate S wheel to adjust
 Range:
Off(-), 1-7
Color Map
 Rotate S wheel to COLOR MAP and press S button
 Rotate S wheel to adjust

Range:
V1-V6, plus two Velocity/Variance maps (VV1 and
VV2).
Filter
Used to reduce the
artifacts caused by
acoustic decoupling or
moving structures
 Rotate S wheel to FILTER and press S button
 Rotate S wheel to adjust
 Range: LOW, MEDIUM, HIGH, ARTEF SUP
Smooth
Makes the flow
representation
homogenous
 Rotate S wheel to SMOOTH and press S button
 Rotate S wheel to adjust
 Range: LOW, HIGH
PW Doppler
PW Doppler audio volume can be decreased or increased by pressing or .
Items in table are not arranged sequentially
To Adjust / Control Do This
Engage PW Doppler  Press UPDATE/LINE to activate cursor
 Roll the trackball to position cursor
 Press the PW control to activate
Auto-Doppler Optimization
 Press AUTO
ADM
Automatic Doppler Trace
 Rotate S wheel to ADM and press S button
Note: These calculations will not be sent to the report.
B-Ref
Alternates between split
screen or full screen in
PW

Rotate S wheel to B-REF and press S button
Velocity (PRF/Scale)
 Rotate S wheel to VELOCITY and press S button

Rotate S wheel to adjust
Baseline
 Rotate S wheel to BASEL and press S button