Siemens ACUSON P300 - Color Doppler Imaging

ACUSON P300™ Ultrasound System Quick Reference Guide
Page | 7
© Siemens 2012. All rights reserved.
*The ACUSON P300 System is not commercially available.
Due to regulatory reasons its future availability cannot be guaranteed.
Color Doppler Imaging
Items in table are not arranged sequentially
To Adjust / Control Do This
Engage Color Doppler  Press C button
Color Gain
 Rotate the UPDATE/LINE/GAIN wheel
ROI Size and Position  Roll trackball to desired position
 Press ACTION and roll trackball to desired size
 Press ACTION to set
2D-CFM
Live dual 2D and color
Doppler
 Rotate S wheel to 2D-CFM and press S button
PWR D (Power Doppler)

Rotate S wheel to PWR D and press S button
PRF (Scale/Velocity)
 Rotate S wheel to PRF and press S button

Rotate S wheel to change PRF
Baseline
 Rotate S wheel to BASEL and press S button

Rotate S wheel to change
D-Steer
Linear transducers only
 Rotate S wheel to D-STEER and press S button
 Rotate S wheel to desired steering angle
Color Doppler Frequency
 Rotate S wheel to FREQUENCY and press S button

Rotate S wheel to adjust
Sensitivity
 Rotate S wheel to SENSIT and press S button
 Rotate S wheel to adjust

Range: 1, 2, 3
Density
 Rotate S wheel to DENSITY and press S button
 Rotate S wheel to adjust

Range: LOW, HIGH
Persistence
 Rotate S wheel to PERSIST and press S button