Siemens ACUSON P300 - Doppler and Dual Mode Operations; Dual Mode Imaging

ACUSON P300™ Ultrasound System Quick Reference Guide
Page | 6
© Siemens 2012. All rights reserved.
*The ACUSON P300 System is not commercially available.
Due to regulatory reasons its future availability cannot be guaranteed.
Dual Mode
Side-by-side imaging
 Press left DUAL
to activate dual screen display
 Press right DUAL
to activate right screen display
 Press 2D
to escape
Note: For live dual, rotate S wheel to NEXT/PREVIOUS, scroll to
SIMULT and press S button.
QUAD Imaging
 When in DUAL function, select NEXT/PREVIOUS, scroll to
QUAD, press the S button

Press right DUAL button to advance
2D-CFM
Live Dual 2D and Color
Doppler
 Rotate S wheel to 2D-CFM and press S button
 Allows for live 2D and Color Doppler imaging
VPAN
Activates panoramic
imaging
 Press TOOLS
, select VPAN, select OK
 Press ACQUIRE
to activate ROI box, press ACQUIRE to
begin scanning, scan, then press ACQUIRE to end acquisition
 Press MEASURE
for labeled measurement
 Press GENERIC MEASUREMENTS
for generic
measurement
Steer Image
Linear transducers only
Note: MVIEW must be deactivated.

Rotate S wheel to B-STEER and press S button

Rotate S wheel to steer image
Biopsy
Activates or de-activates
biopsy display
 Rotate S wheel to BIOPSY and press S button
Color, PW and CW Doppler and M-mode Optimization
The UPDATE/LINE/GAIN controls gain levels (rotate) and cursor/update (press)
for CW, PW and Color Doppler.