Siemens ACUSON P300 - Page 6

ACUSON P300™ Ultrasound System Quick Reference Guide
Page | 5
© Siemens 2012. All rights reserved.
*The ACUSON P300 System is not commercially available.
Due to regulatory reasons its future availability cannot be guaranteed.
levels
Colorize (Tint)
Sets the chromatic scale
active in 2D
 Rotate S wheel to COLORIZE and press S button
 Rotate S wheel to adjust

Range: Off(-), Orange, Indigo, Magenta, Blue, Yellow, RGB
Sharpness
Accentuates edges and
small differences in tissues
 Rotate S wheel to SHARPNESS and press S button

Rotate S wheel to adjust
 Range: 1-5
Density
Adjusts line density
 Rotate S wheel to DENSITY and press S button

Rotate S wheel to adjust
 Range: LOW, HIGH
Persistence
Weighted average of
frames over time
 Rotate S wheel to PERSIST and press S button

Rotate S wheel to adjust
 Range:
Off(-)
, 1-6; AVERAGE
Clip Duration
Sets duration of clips
 Rotate S wheel to CLIPS DUR and press S button
 Range (seconds): 1, 2, 3, 4, 5, 7, 10, 20, 30, 60, UNLIMITED
MVIEW
Spatial Compounding
 Rotate S wheel to MVIEW and press S button

Rotate S wheel to adjust
 Range:
Off(-), 1-10
XVIEW
Provides speckle reduction
and contrast enhancement
 Rotate S wheel to XVIEW and press S button

Rotate S wheel to adjust
 Range:
Off(-),
1, 2, C.
 XVIEW level C options: X SMOOTH 1-5, X DETAIL 1-8,
X ENHAN 1-12
2D Imaging Features
The following table identifies 2D imaging features.
Items in table are not arranged sequentially
Feature To Use Feature
One button image
optimization

Press AUTO
to automatically adjust the general gain
and TGC