ACUSON P300™ Ultrasound System Quick Reference Guide
Page | 15
© Siemens 2012. All rights reserved.
*The ACUSON P300 System is not commercially available.
Due to regulatory reasons its future availability cannot be guaranteed.
Roll the trackball to scroll through the annotations
Press Right Select to set
Move text
Press any alphanumeric key on the QWERTY keyboard to activate the cursor
Roll the trackball to place the cursor within the text, press Right Select
Press ACTION
, text will now be framed in yellow
Roll the trackball to the new location
Press Right Select to set
Delete Text
Press any alphanumeric key on the QWERTY keyboard to activate the cursor
Roll the trackball to place the cursor within the text
Press Right Select within the annotation (yellow)
Rotate S wheel to CLEAR or CLEAR ALL and press the S button
Place an Arrow/s
Press any alphanumeric key on the QWERTY keyboard to activate text menu
Rotate S wheel to ARROW and press the S button
Rotate S wheel to rotate arrow
Roll the trackball to desired location and press the Right Select to anchor (green)
Delete an Arrow/s
Rotate S wheel to CLEAR ALL and press the S button
Add a Pictogram/s
Press MARK
Arrow is active on the trackball
Rotate the arrow by rotating S wheel to ARROW, press the S button
To select a different pictogram, rotate S wheel to MARK and press the S button
Rotate S wheel until desired pictogram is displayed
Delete a Pictogram
If necessary, press MARK
Rotate S wheel to CLEAR and press the S button
To Next Page
Loading...
