Siemens C60 - Divert; Select

right page (69) of C60 Lion en, A31008-H5850-A1-1-7619 (05.09.2003, 08:55)
©
Siemens AG 2003, I:\Mobil\L55\C60_Lion_kJava\en\fug\Druck\C60_Setup.fm
69Setup
VAR Language: English; VAR issue date: 31-Juli-2003
§Menu§
¢
m
¢
Call setup
¢
Select a function.
Headset
Only in conjunction with an original
Siemens headset (p. 94). If an origi-
nal Siemens Headset is used the pro-
file is automatically activated when
the headset is plugged in.
Auto answer
(factory default: off)
Calls are accepted automatically
after a few seconds (except where
the ringer is switched off or set to
beep). You should therefore be
wearing the headset. Eavesdropping
is possible!
Automatic setting
Accept call with the Call key or PTT
key (Push To Talk) when the key lock
is activated.
Divert
§Menu§
¢
m
¢
Divert
¢
Select a function.
You can set the conditions for which
calls are diverted to your mailbox or
other numbers.
Set up call divert (example):
The most common condition for call
divert is, for example:
All calls
b
All calls are diverted.
n Symbol in the top line of
the display in standby
mode.
Unanswered
b
G
Select Unanswered.
(Includes the conditions
Not reachable, No reply,
Busy see below)
§Select§ Press.
Set Select.
J
Enter the phone number
to which the caller will be
diverted (if not already
done)
Or
· Select this phone number
from the Phonebook or
via §Mailbox§.
§OK§ Confirm. After a short
pause, the setting is con-
firmed by the network.
Auto answer
If you do not notice that you phone has
accepted a call, there is the danger that the
caller may eavesdrop.