Siemens CF62 Operating Instructions

© Siemens AG 2003, I:\Mobil\R65\CF62_v2\en\_von_itl\sug\A65_Phone.fm
15Calling
VAR Language: English; VAR issue date: 08-Januar-2004
left page (15) of CF62 Leopard en, A31008-H6050-A1-2-7619 (19.01.2005, 16:24)
Calling
Dialling with number
keys
Open the clamshell to gain access to
the keypad.
The phone must be switched on
(standby mode).
J
Enter number (always
with area code/interna-
tional dialling code).
§Clear§ A short press clears
the last digit, a long press
clears the entire phone
number.
A
Press the Call key. The dis-
played phone number is
dialled.
End call
B
Press the End key briefly.
Press this key even if the
person on the other end
of the line has hung up
first.
Set volume
G
Use the top of the naviga-
tion key to start adjusting
the volume. Then press
top/bottom to adjust the
volume as required
(only possible during a
conversation).
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
Redial
To redial numbers that were dialled
previously:
A
Press the Call key once.
I
Pick out the required
phone number from the
list, then to dial ...
A Press ...
If the number is busy
Auto. redial
§Auto dial§ Press. The phone number
is automatically dialled
ten times at increasing
time intervals.
Call back b
§Call back§ Press. Your phone rings
when the busy number is
free.
Reminder
§Prompt§ Press. A beep reminds you
to redial the displayed
phone number after
15 minutes.

Siemens CF62 Specifications

General

Brand	Siemens
Model	CF62
Category	Cell Phone
Language	English