Siemens CF62 Operating Instructions

© Siemens AG 2003, I:\Mobil\R65\CF62_v2\en\_von_itl\sug\A65_Phone.fm
Calling16
VAR Language: English; VAR issue date: 08-Januar-2004
left page (16) of CF62 Leopard en, A31008-H6050-A1-2-7619 (19.01.2005, 16:24)
Accept call
The phone must be switched on
(standby mode). An incoming call
will interrupt any other use of the
phone.
Open the clamshell.
And
§Answer§ Press.
Or
A
Press.
A phone number transmitted by
the network is displayed or the
corresponding name if it is contained
in the Phonebook (page 24) or Ad-
dressbook (page 25). A picture may
also appear (settings page 25).
Reject call
Open the clamshell.
And
§Reject§ Press. To divert call, see
page 43.
Or
B
Press briefly.
International dialling codes
0
Hold down until a "+" is dis-
played.
§Country§ Press and select country.
Additional information
When Auto answer (page 44) is activated
a call can be answered by simply opening
the clamshell.
Additional information
When Auto answer (page 44) is activated
you must reject the call within 2 seconds.
Otherwise it will be accepted automatically.
Warning!
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ring tones.
Additional information
 Missed calls..........................page 28
Switch off ringer............................page 36

Siemens CF62 Specifications

General

Brand	Siemens
Model	CF62
Category	Cell Phone
Language	English