Siemens CF62 Operating Instructions

© Siemens AG 2003, I:\Mobil\R65\CF62_v2\en\_von_itl\sug\A65_Setup.fm
Setup44
VAR Language: English; VAR issue date: 08-Januar-2004
left page (44) of CF62 Leopard en, A31008-H6050-A1-2-7619 (19.01.2005, 16:24)
§OK§ Confirm. After a short
pause, the setting is con-
firmed by the network.
All calls
b
All calls are diverted.
n
Symbol in the top line of
the display in standby
mode.
Other possibilities for divert:
Not reachable, No reply, Busy.
Status check
You can check the current divert sta-
tus for all conditions.
After a short pause, the current situ-
ation is transmitted by the network
and displayed.
p Condition set.
o Not set.
s
Display if status is un-
known (e.g. with
anewSIM card).
Clear all
b
All set diverts are cleared.
§Menu§
KmKPhone setup
KSelect function.
Clamshell
Set to allow calls to be answered by
opening clamshell.
Minute beep
During a call, you will hear a beep af-
ter each minute as a reminder of the
time elapsed. The recipient does not
hear this beep.
Clock
§Menu§ KmKClock
KSelect function.
Time/date
The clock must be set to the right
time once at start-up.
§Change§ Press.
J
First enter the date, then
the time.
Time zones
Set the time zone for your area.
Time format
Select 24h or 12h.
Additional information
If the battery is removed for longer than
30 seconds, the clock will be reset.

Siemens CF62 Specifications

General

Brand	Siemens
Model	CF62
Category	Cell Phone
Language	English